Tabla de contenido
3
Drill four pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in.
(70 mm). Be sure to drill into the center of the studs.
4
2¾ in. (70 mm)
1/8 in.
(3 mm)
Install wall plate
Tighten the lag bolts only until they are pulled firmly against the wall plate.
All four lag bolts
movement of the wall plate
fastened to the wall before continuing on to the next step.
Go to STEP 3 on PAGE 12.
13
using four lag bolts
13
CAUTION:
Avoid potential personal injury or property damage!
MUST BE firmly tightened to prevent unwanted
14
. Ensure the wall plate is securely
13
15
14
and four washers
14
15
.
9
Tabla de contenido
