Intended Use; Vibration Level - Rebel RB-1002 Manual Del Usuario

INFORMATION ABOUT THE POWER TOOL

Intended use

This screwdriver is intended for driving in and loosening screws as well as drilling.
Technial data
Battery
Charging time
AC charger (RB-2001-CH)
Max. torque
Number of torque positions
No load speed
Chuck
Weight
In set
Sound pressure level L
Sound power level L
Hand-arm vibration a
(screw driving without impact)

Vibration level

The vibration emission level stated in this instruction manual has been measured in
accordance with a standardized test given in EN 61029; it may be used to compare one
power tool with another and as a preliminary assessment of exposure to vibration when
using the power tool for the applications mentioned.
• Using the power tool for different applications, or with different or poorly maintained
accessories, may significantly increase the exposure level.
• The times when the tool is switched off or when it is running but not actually doing the
job, may significantly reduce the exposure level. Identify additional safety measures
to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
OPERATION
Note: The battery is partially charged. To ensure proper operation of the power tool,
the battery must be fully charged before first use.
EN
20 V; 2 Ah, Li-Ion (RB-2001)
1- 1,5 h
Input
Output
30 Nm
21
Level I
Level II
up to 13 mm
1,5 kg
13 accessories, AC charger, battery, user's manual
80,9 dB(A), K= 3 dB(A)
PA
91,9 dB(A), K= 3 dB(A)
WA
12,473 m/s
h
100 – 240 V; 50/60 Hz
21,5 V; 2,2 A
350 rpm
1300 rpm
K=1,5 m/s
2 2
36