Uline H-3643 Manual De Instrucciones página 2

Figure 2
8
Figure 3
Tension Knob
Figure 4
10
PAGE 2 OF 9
ASSEMBLY CONTINUED
9
11
2. Align armrest with holes on bottom of seat cushion.
Use four 5/16 x 1/" screws (8) to attach. Repeat on
opposite side. (See Figure 2)
NOTE: Use Allen wrench to tighten all screws.
3. Align mechanism with holes on bottom of seat
cushion with tension knob facing the front of seat.
Use four 5/16 x 1" screws (9) to attach. (See Figure 3)
4. Align back cushion mounting plate with holes on
bottom of seat cushion. Use two 3/8 x 1/" screws (10)
and two 3/8 x 1/" screws (11) to attach.
(See Figure 4)
0721 IH-3643