Phonic AM1204FX RW Manual Del Usuario página 6

6. Depending whether you have Windows XP, Vista, 7 or 8,
this may differ slightly, but the settings can always be found
within the Control Panel's audio menu.
7. If you don't want to use the AM1204FX RW as your
computer's default audio device, you can simply enter your
DAW or other audio software and select "USB Audio Codec"
as your default device. This will allow the interface to be
used within the software only.
Mac
1. Turn both the AM1204FX RW and the computer on.
2. Connect the AM mixer to the computer via the provided USB
cable.
3. Enter the AUDIO MIDI SETUP menu.
4. Select the "USB Audio Codec" as your input and output
device.
5. The AM1204FX RW is now your default audio device.
6. Alternatively, enter your DAW software (or other relevant
audio program) and select the "USB Audio Codec" in the
device preferences.
7. Be sure to set your minimum buffer settings to 64 samples
as to avoid clicks and pops.
USB PLAYBACK / RECORD
The AM1204FX RW has a built in module for both USB playback
and recording as well as Bluetooth audio streaming. First and
foremost, use the 9 and : buttons to navigate the main menu
visible on the USB/BT module's screen.
Any connected USB drive will be utilized automatically. Playing
any audio files is as simply as using the ; } button to select the
"MSC" option on screen and again to play a specific track found
in the music playback menu.
Press the n/MENU button to stop playback and again to return
to the main menu. Push the button at any time to return to the
previous menu.
Users can also scroll right on the main menu and select "REC" to
record files. This function will record the main mix. The recording
destination can be selected in the recording menu. Pushing the
9 button will initiate the recording process and the : button will
finalize recordings. Use the ; } button to pause recording at any
time.
USB Playback is sent through channel 7/8. When using the stereo
input connectors simultaneously, the signals will be combined.
Avoid doing so if at all possible, as managing the input levels of
two inputs on a single channel can be challenging.
In either the MSC or REC menu, push and hold the ; } button to
access additional features such as EQ and echo effect. In the
recording menu you can also select to finalize recordings.
2
BLUETOOTH CONNECTIVITY
The Bluetooth function can be viewed within the USB/BT module
by selecting BT in the main menu. The AM1204FX RW can
be found in your Bluetooth-enabled device as "PHONIC". The
password is 0000.
The BT audio is sent through channel 7/8. Both the USB playback
and BT can be used simultaneously through this module, and
users are advised to adjust the bluetooth level using their phone
or tablet's own volume control. Push and hold the ; } button to
access additional features.
AM1204FX RW