Phonic SMARTMAN 708A Manual De Usuario página 14

USB RECORD SOURCE
The USB Recorder page has individual source buttons
that can be assigned to your USB Recording mix. These
include Mic 1 and 2, Line In 1 and 2, RCA input, BT
(Bluetooth) input, WR A and WR B (wireless receivers, if
installed). Only one source is allowed to be selected.
10
AUX MIX
The Smartman has a single AUX mix that users can create
using any of the input signals. The AUX mix is used as the
input source of the Digital Effects Processor, allowing use
of a number of input sources simultaneously. These can
then be fed into the Digital Effects Processor and sent out
the speaker (or through the left/right outputs).
To create the AUX mix, Phonic has provided a single
virtual rotary control for each of the incoming signals. This
includes Mic 1, Mic 2, Line 1, Line 2, BT In, USB In, WR A,
WR B and RCA Input. It's worth noting that WR A and WR
B are only functional when the wireless receiver modules
are installed.
When a virtual rotary control is turned all the way down, the
"AUX SEND" is essentially "OFF" for the corresponding
mix. These rotary controls can be adjusted up to 10dB.
Each AUX SEND also features a pre/post button. This
determines whether the signal sent to the AUX mix will
be taken before the corresponding channel's fader (pre-
fader) or after the signal has been altered by the channel's
fader (post-fader).
SMARTMAN 708A