JB Systems usb 2.2 mk2 Manual De Instrucciones página 7

ENGLISH
 CDJ-mode: this is the standard mode, used by most DJ Players. Both the tactile center part and the
outer ring behave identically. While the track is playing, the jog wheel temporarily bends the pitch of
the music up to +/-100% by rotating the wheel clockwise to speed it up or counterclockwise to slow it
down. The amount of pitch change is determined by the speed of rotation. In pause mode you will
hear the typical very small loops that give you the possibility to set a cue point with 1frame
(1/75seconds) accuracy.
3. LOOP IN button: Allows you to set the cue point without stopping the playback (CUE ON THE FLY).
This button also sets the beginning of a seamless loop.
4. LOOP OUT button: Used to set the endpoint when looping music. The player starts to loop seamlessly
until you press this button again to exit. When a loop is programmed but not active you can also restart
the loop. The point where you press the button will be memorized as the new end point of the loop. In
loop edit mode pressing the OUT button stops the loop editing and saves the new loop endpoint.
5. RELOOP/STUTTER button: This button has 3 functions:
 RELOOP: When a loop was programmed and you have hit the OUT button, press the RELOOP
button to enter the loop again. To exit the loop: press the OUT button. (begin and end points of the
loop are unchanged)
 STUTTER: When a loop is playing you can press this button to restart the loop at once. You can also
press this button when a track is not playing in loop. Every time the RELOOP/STUTTER button is
pressed, it will restart the music from the preprogrammed cue point. The stutter effect adds extra
creativity to your performance.
 ENTER EDIT LOOP MODE: When a loop is programmed (LOOP IN and OUT/EXIT buttons are on)
you can enter loop edit mode by pressing the RELOOP/STUTTER button until the display shows the
time of the current loop endpoint: use the JOG-WHEEL to adjust the endpoint.
6. CUE button: Pressing the CUE button during playback provides an immediate return to the position at
which play was started. Playback starts immediately from the programmed cue point for as long as the
CUE button is pressed. The player jumps back to the cue point as soon as the CUE button is released.
Also with the unit in pause mode (Play/Pause button blinks) the jog wheel is used to set a different start
point. By pressing "PLAY/PAUSE" or "LOOP IN" button followed by "CUE", you can confirm this new cue
point.
7. PLAY/PAUSE button: every time you press the PLAY/PAUSE button the player changes from play to
pause or from pause to play. The button blinks as long as the player is set to pause.
8. FOLDER button: changes the function of the TRACK knob (9) while the search key is set to "Std"
(standard track/folder search without Track-Indexer database).
 While the LED is off: the TRACK knob is used to browse the tracks of the selected folder.
 While the LED is on: the TRACK knob is used to browse the folders on the USB-drive.
9. TRACK knob: this knob has different functions (also see the chapter "HOW TO USE"):
 CDs or no Track-Indexer database: depending on the status of the FOLDER button (8) you can
browse tracks or folders on the CD or USB-device. To increase search speed on USB-devices with a
lot of folders/tracks, you can also turn the JOG-WHEEL (1) while you keep the TRACK knob
pressed.
 Track-Indexer database search: (press the DATABASE-button (10) and desired search key)
 Turn the knob to select the first character of the string you're looking for, after that use the
JOG-WHEEL to search for the desired track.
 Press the knob while you turn it to change the search key in the database, you can search
the keys:
 Art: search for "artist names" in alphabetical order (default search key)
 Alb: search for "album names" in alphabetical order
 Gen: search for "Genres" in alphabetical order
 Std: don't use the Track-Indexer database system, just folders and tracks manually.
 During playback: press the knob to see the different ID3-tags on the display:
 Press 1x: Artist name of the current track is shown
 Press 2x: Album name of the current track is shown
 Press 3x: Genre of the current track is shown
 Press 4x: Bitrate information of the current track is shown
 Setup menu active: while the setup menu is active (see TIME button (19)) turn the knob to browse
the menu, press the knob to select a menu option to change it. Please refer to chapter "SETUP
MENU" for more information.
JB SYSTEMS
®
5/82
OPERATION MANUAL
USB2.2 MK2