Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Diagram and Parts Description
Microphone Input with Volume Control (1/4"): This
1.
mono input accepts a 1/4" input such as a
microphone, guitar, or other musical instrument.
2.
Auxiliary Input: This stereo 1/8" input can be used
to connect a smartphone, MP3 player, or other audio
sources.
3.
Bluetooth: The Paired LED will be lit when a device is
paired to House Party. This LED will not be lit when House
Party is first powered on (unless it was previously paired
with a device). Press the Disconnect button to disconnect a
paired Bluetooth device.
Master Volume Control: This adjusts the speaker's main
4.
mix volume, which includes Microphone Input, Auxiliary
Input, and the audio of a paired Bluetooth device.
5.
Power LED: Indicates whether House Party is on or off.
6.
Light Mode: There are three modes to select from for how
the strobe lights react to the music.
Beat = the light reacts to the beat of the music.
Party = dome light spins and changes color whether
there is music playing or not.
Off = the light is off and the lights in the dome are not
spinning.
7.
Dome: The lights in the dome can spin and react to the music
playing (depending on the Light Mode that is selected).
Power Input: The integrated power cable is connected here.
8.
9.
Power ON/OFF Switch: Turns House Party on or off.
10.
Fans: These air intake and air outtake vents operate when
Light Mode is turned on to ensure the light dome operates
efficiently.
Note: Please ensure these vents do not get covered or blocked.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also,
try to reduce the overall volume of House Party.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the
microphone away from the speaker.
If you can't hear the microphone over the music volume: Turn down the music volume from your source.
Connecting with a Bluetooth Device
1.
Turn on House Party using the power switch.
2.
Navigate to your Bluetooth device's setup screen, find "House Party" and connect.
Note: The next time you approach House Party with your Bluetooth device, it will automatically re-
connect.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
3.
If your Bluetooth device is not able to connect to House Party, press the Bluetooth Disconnect button
on House Party to break previous Bluetooth connections and reset the Bluetooth module.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
The Paired LED will light up solid when it is 'paired'.
4.
5.
Start music playback from your Bluetooth device.
6.
To connect to another Bluetooth device, press the Bluetooth Disconnect button. Repeat Step 2.
7.
To disconnect a connected Bluetooth device, press the Bluetooth Disconnect button.
Note: If you experience trouble connecting or playing music, update your device's OS.
*WARNING: Do not look directly into the
dome light. Do not sit, stand, or apply
pressure on the dome light.
1
4
7
2
3
5
4
9
10
8
6
Tabla de contenido
