Specifications - Aiwa CDC-X504MP Manual De Instrucciones

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
23.2 watts per channel minimum
continuous average power into 4
ohms, 4 channels driven from 20 Hz
to 20 kHz with no more than 5% total
harmonic distortion.
Tuner section
FM
Tuning range 87.5 - 107.9 MHz
Antenna terminal External antenna connector
Intermediate frequency
10.7 MHz/450 kHz
Usable sensitivity 9 dBf
Selectivity 75 dB at 400 kHz
Signal-to-noise ratio 67 dB (stereo),
69 dB (mono)
Harmonic distortion at 1 kHz
0.5 % (stereo),
0.3 % (mono)
Separation 35 dB at 1 kHz
Frequency response 30 - 15,000 Hz
AM
Tuning range 530 - 1,710 kHz
Antenna terminal External antenna connector
Intermediate frequency
10.7 MHz/450 kHz
30 µV
Sensitivity
CD player section
Signal-to-noise ratio 120 dB
Frequency response 10 - 20,000 Hz
Wow and flutter Below measurable limit
Power amplifier section
Outputs Speaker outputs
(sure seal connectors)
Speaker impedance 4 - 8 ohms
Maximum power output
52 W × 4 (at 4 ohms)
General
Outputs Audio outputs terminal
(rear/sub switchable)
Power antenna relay control
terminal
Power amplifier control
terminal
Inputs Antenna input terminal
Tone controls Low:
±10 dB at 60 Hz (HIP-HOP)
Mid:
±10 dB at 1 kHz (HIP-HOP)
High:
±10 dB at 10 kHz (HIP-HOP)
Power requirements 12 V DC car battery
(negative ground)
Approx. 178 × 50 × 176 mm
Dimensions
(7 1
(w/h/d)
Mounting dimensions
Approx. 182 × 53 × 161 mm
(7 1
(w/h/d)
Mass Approx. 1.2 kg
(2 lb 10 oz)
Supplied accessories Parts for installation and
connections
Front panel case (1)
Card remote control
RM-Z304
Design and specifications are subject to change
without notice.
× 2 × 7 in.)
/
8
× 2 × 6
/ 1 / 3 / in.)
4 8 8
17