Denon Professional DN-700AV Guia Del Usuario página 11

Playing Network/Media Server Files
1. If DN-700AV is powered off, press the Power button to power it on.
2. Use the Source Select knob to choose Multimedia as the source, select Media Server using the  or 
buttons, then press Enter or ►.
3. Press the  or  buttons to select the server, then press Enter or ►.
4. Use the  or  buttons to select the file, then press Enter or ►.
Playback will begin once buffering reaches "100%".
Listening to Streaming Music/Internet Radio
You can listen to streaming music services or radio broadcasts distributed over the Internet. The Internet radio
stations can be selected by genre and location.
1. If DN-700AV is powered off, press the Power button to power it on.
2. Verify that the network settings on DN-700AV are correct.
3. Use the Source Select knob to choose Multimedia.
4. Use the Cursor ◄ and ► buttons on the remote control to select a music streaming service or an Internet
radio station, then press Enter or ►.
5. Press  or  to select the station, then press Enter or ►.
Playback will begin once buffering reaches "100%".
Saving Internet radio stations as Favorites
1. If DN-700AV is powered off, press the Power button to power it on.
2. Use the Source Select knob to choose Multimedia.
3. Use the Cursor ◄ and ► buttons on the remote control to select an Internet radio station, then press Enter
or ►.
4. Select an Internet radio station, then press Enter or ► to start playback.
5. While the Internet radio station you want to store as a preset is playing, press Mem.
6. Press  or  to select Favorites, then press Enter.
7. Press ◄ to select Add.
Listening to Internet radio stations registered in your Favorites
1. If DN-700AV is powered off, press the Power button to power it on.
2. Use the Source Select knob to choose Multimedia.
3. Use the Cursor ◄ and ► buttons on the remote control to select Favorites.
4. Press  or  to select the Internet radio station, then press Enter or ►.
Playback will begin once buffering reaches "100%".
Using a Euroblock Connector
1. Twist the speaker wire to form a tight strand and
insert this into the appropriate port, pushing the wire
until it is secured inside.
2. Attach the Euroblock connector to the input terminal
on DN-700AV.
3. To disconnect a wire, use a small screwdriver to
press in the spring above the insert port while
pulling out the wire.
11