Hkoenig AXO900 Manual De Instrucciones página 6

Accessories:
1. Before assembling the cleaner, please confirm all parts and components for the cleaner are
received by referring to Parts and Components List.
2. Please remember to cut off the power supply before assembly.
Assembly of hose
1. As is shown in Figure (3), insert the hose into the duct inlet of the machine body in horizontal
direction. Please pay attention to the alignment of two projecting parts. Turn the hose right when
it is pushed into the bottom, a click of inserting sound may be heard, i.e. the hose is assembled
into the machine body completely.
2. Assembly and Removal of dust barrel
As is shown in Figure (4), place the bottom of the dust barrel on the projecting part at the front end
of the machine body, and press down the dust barrel. When the front-end hook is entered into the
corresponding part of the machine body completely, and a click of inserting sound is heard, which
indicate that the dust barrel is assembled in place. To remove the dust barrel, press down the
1. Flat nozzle
Figure (1)
Assembly Instructions
2. Combination brush
Figure (2)
Figure (3)