Use Instructions - M Confort HOLE Manual De Usuario

5. USE INSTRUCTIONS

1. Plug in the power, the cooler make a buzzing sound, and the power
indicator light is on, cooler enter standby mode.
2. Press the POWER button to start the cooler machine, the power
indicator light will be on, and the fan will run at medium speed automati-
cally; the medium speed light will be on, and the ANION function will turn
on automatically; the display screen will show the current room tempe-
rature. Press the power button again and the machine will return to
stnadby mode.
3. Press the SPEED button, the wind speed will cycle from medium to
high to strong to low. Led lights will indicate current speed.
4. Press the TIMER button to program the automatic shutdown
from 1 to 24 hours. Each time we press the button, we add an hour
to the shutdown time.
5. Press the OSCILLATION button, the air outlet rotor will start to
work.
6. Press the COOL button to start evaporative cooling. If the water
tank is low on water, the equipment will emit an audible alarm and the
"Cool" indicator will flash. After adding a little water, press the "Cool"
button and the alarm will stop.
7. Press the LED button to turn the led display on or off.
8. ICE BOX. Put the ICE BOX in the freezer to freeze, and then put it in the
water tank to lower the water temperature. It is strictly forbidden to open
and drink the contents of the ICE BOX. The ice box can be used conti-
nuously.
Note:
1. If the machine does not operate for 2 minutes, the LED display will turn off
automatically. Press any button to reset the LED display, it will resume the last
state.
2. When plugged in, the machine will make a buzzing sound.
3. If the machine detects water shortage, the buzzer will sound 6 times.
4. When the temperature sensor is disconnected or short-circuited, the display
will show a constant temperature of 25ºC.
07