Tabla de contenido
Idiomas disponibles
Idiomas disponibles
UHF Pocket Transmitter
These instructions are intended for users without
any specific technical knowledge Please read these
instructions carefully prior to operating the unit and
keep them for later reference
All operating elements de scribed can be found
on the fold-out page 3
1
Overview
1 LC display to indicate the group (
channel and the battery status in 4 levels
2 On / off switch
3 Microphone input (4-pole mini XLR)
4 Button SET
to activate the setting modes one after another
group (keep button pressed for a while)
channel sensitivity automatic fre-
quency matching identification number
lock function
and to confirm the settings
Note: When the lock function has been activated (in-
dication
when you press a button or use the
on /off switch), you will only be able to activate the
setting mode for the lock function (
5 Button − to make settings in the different setting
modes (to search in descending order, to select a
lower value and to deactivate functions)
6 Button + to make settings in the different setting
modes (to search in ascending order, to select a
higher value and to activate functions)
7 Buttons to unlock the battery compartment
cover (8): press the buttons firmly and fold up
the cover
8 Battery compartment cover
9 On the rear: rotary switch to attenuate the level
(6 dB or 20 dB), adjustable with the small screw-
driver provided
2
Important Notes
This unit corresponds to all relevant directives of
the EU and is therefore marked with
•
The unit is suitable for indoor use only Protect
it against dripping water and splash water, high
air humidity and heat (admissible ambient tem-
perature range: 0 – 40 °C)
•
For cleaning only use a dry, soft cloth; never use
water or chemicals
8
•
...
), the
3
The UHF PLL pocket transmitter IN-264TB / 5 is
designed for transmission in the frequency range
506 – 542 MHz It is suitable for operation with the
following receivers from JTS:
– IN-164R / 5 with one receiver unit
– IN-264R / 5 with two receiver units
The pocket transmitter is supplied with the lavalier
microphone CM-501 Instead of the CM-501, it will
also be possible to use other microphones from the
JTS product range which are designed for opera-
tion with a pocket transmitter and equipped with
a 4-pole mini XLR connection, e g the headband
chapter 5 1 5)
☞
microphone CM-214U or the instrument micro-
phone CX-516W
The transmitter with the microphone connected
and the receiver create a wireless audio transmis-
sion system The transmission channel is selected
from 6 channel groups of different size; the largest
group contains 22 preset channels The transmis-
sion range depends on local conditions; in free
field, it may reach a maximum of 300 m
automatically match the frequency between the
transmitter and the receiver unit
3.1 Conformity and approval
Herewith, MONACOR INTERNATIONAL declare that
the transmitter IN-264TB / 5 complies with the direc-
tive 2014 / 53 / EU The EU declaration of conformity
is available on the Internet:
www jts-europe com
This transmitter may be operated in the following
countries:
DE
In the Federal Republic of Germany, the transmitter
requires a frequency assignment (for which a
fee is charged)
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is
not correctly operated, or if it is not repaired in
an expert way
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harmful
to the environment
Applications
The REMOSET function of the system will
Tabla de contenido
