Idiomas disponibles
Idiomas disponibles
3.
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
IMPORTANT: Be sure to drill into the center of the studs.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
19
4.
Install wall plate
using four lag bolts
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts
19
movement of the wall plate
3
18
20
and four washers
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
3 in. (75 mm)
7/32 in.
(5.5 mm)
18
.
21
. Tighten the lag bolts only until they are pulled firmly against the wall plate
20
MUST BE firmly tightened to prevent unwanted
4
19
19
17
21
20
.
9
