Assembly - Husky HOTC6205BB1M Guía De Uso Y Cuidado

Assembly

1
Attaching the side handle
□
Attach the side handle (B) to the cabinet using four bolts
( )
BB .
□
Tighten all bolts with the 10 mm wrench (CC).
NOTE: The holes in the cabinet are tapped and do not
require nuts.
BB
3
Installing the shelf brackets and shelf
□ Install the four shelf brackets (L) inside the storage area at
the desired shelf height location.
□ Ensure all shelf brackets are aligned horizontally and are
properly seated in the bracket slots.
□ Install the shelf (M) inside the storage area so that it sits on
top of the four shelf brackets (L) flush and level.
L
□
B
M
2
Attaching the power strip brackets
□ Attach the power strip brackets (H) to the cabinet using four
bolts (AA).
□
Tighten all bolts using a screwdriver.
Do not over tighten the bolts to avoid damage to the finish.
NOTE: The holes in the cabinet are tapped and do not
require nuts.
4
Reversing the Wood Work Surface
□ The wood work surface (A) comes pre-installed with the
bench. After wear and tear, the surface may be reversed to
use the clean bottom surface. To reverse, remove the eight
bolts from the top of the wood work surface, flip surface,
and reinstall the eight bolts.
6
□
H
AA
A