Semilac ELECTRIC NAIL DRILL 24 W Manual Del Instrucciones página 4

Use only AC adapters intended for this device. Do not use voltages
other than those indicated on the device. This equipment can be
used by children at least 8 years of age and people with reduced
physical, mental capabilities, and those who lack of experience and
knowledge, if supervision or instruction concerning the use of
equipment in a safe manner will be ensured, so that the associated
threats were understandable. Children should not play with the
equipment. Children should not be allowed to perform the cleaning
and maintenance of equipment.
PACKAGE CONTAINS
Semilac Electric nail drill (x1)
Set of bits (x1)
Foot pedal (x1)
Instruction manual (x1)
PARTS DESCRIPTIONS
1. Speed control knob.
2. Handpiece.
3. Rotation direction change switch.
4. On/Off button.
5. Power supply unit.
6. Foot pedal.
7. Handpiece socket.
8. Foot pedal socket.
GENERAL INSTRUCTION
• Please read the manual before use.
• Before use, make sure the device is turned off.
• Set the speed control knob to 0.
• Fit the selected bit in the handpiece. Mind that it is properly set in its slot. Connect the handpiece to the power supply unit.
• If you want to pedal-control your device, connect the foot pedal to the device.
• Connect the power supply cable to a power source.
• Press the "ON" button – when the button lights up, the device is ready.
• The device will start running once the 0 range on the knob is exceeded.
• To control the speed with the foot pedal, gradually increase the pressure of your foot on the pedal.
SPECIFICATIONS
Size: 120x91x(H)92 mm
N.W.: 0,4 kgs
Rotational speed: 3000-30000 RPM
Adapter Input: 110-240 VAC
Adapter Output: 24 VDC / 1 A
Power: 24 W (max)
CHARACTERISTICS
• An easy bit fitting system.
• Efficient and silent operation with no vibrations.
• Speed is regulated with the knob or the foot pedal.
• 6 bits for: shortening, shaping, buffing, removal of cuticles, hybrid, gel and acrylig-gel products and artificial nails.
SAFETY OPERATION INSTRUCTION AND WARNINGS
• Before use, make sure the bit is correctly fitted and secured in the handpiece. Starting the drill with a damaged or not properly
secured bit may cause damage to the device.
4 EN