Tabla de contenido
BASIC SHREDDING OPERATION
Continuous operation:
Up to
NOTE: Shredder runs briefly after each pass
to clear entry. Continuous operation beyond
period.
ADVANCED PRODUCT FEATURES
SAFESENSE
TECHNOLOGY OPERATION
®
Stops shredding immediately when hands touch the paper opening.
SET-UP AND TESTING
2
1
Touch test area and
Turn the shredder ON
look for the SafeSense
( ) to activate
indicator to illuminate
SafeSense
®
BASIC PRODUCT MAINTENANCE
OILING SHREDDER
All cross-cut shredders require oil for peak performance.
If not oiled, a machine may experience diminished
sheet capacity, intrusive noise when shredding and could
ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty
your waste bin.
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
TROUBLESHOOTING
PAPER JAM
1
2
Press and hold Reverse
Alternate slowly back and forth
(R) 2-3 seconds
All manuals and user guides at all-guides.com
PAPER/CARD
1
2
Set to Off
Press Auto-On ( )
3
DS-2
SafeSense
is active
®
and working properly
®
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1
Set to Off
Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature
and needs to cool down. This indicator will remain illuminated and the shredder will not operate for the duration of the recovery
time. See Basic Shredding Operation for more information about the continuous operation and recovery time for this shredder.
4
3
Set to Off
and unplug
3
4
or
Feed into paper entry
Hold card at edge
and release
3
2
Press and hold Reverse
*Apply oil across entry
(R) 2-3 seconds
6
5
Gently pull uncut paper
Press and hold
from paper entry. Plug in.
Reverse (R)
5
6
Set to Off
Feed into center of
entry and release
3
Tabla de contenido
