Cleaning & Maintenance - Nostalgia PC530CTRR Instrucciones Y Recetas

CLEANING & MAINTENANCE
1. Make sure appliance is unplugged and COMPLETELY COOLED before cleaning. Unplug
the outer plug to the outlet as well as the Kettle motor plug inside the Main Unit (A).
2. Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the inside
and outside of Main Unit (A), then wipe with a non-abrasive towel to dry.
3. Unplug Kettle motor and remove Kettle from support brackets.
4. Take Kettle out of the Main Unit (A). After removing Kettle from
Main Unit (A), fill
2
5. Let the Kettle sit for 15 – 20 minutes to cut the grease. (Time may vary – use
your own judgment depending on the amount of cleaning necessary.)
6. Empty water. If necessary, use the scrubber side of a
cleaning sponge to scrub inside of Kettle.
7. Rinse inside carefully and dry.
8. Wipe outside of Kettle with damp cloth and dry.
NOTE: To protect the motor plug from getting wet, never immerse the Kettle in
any liquid. Never place any parts in the dishwasher. Always wash by hand.
13
/ of Kettle with hot, soapy water.
3