ASROCK ConRoe1333-eSATA2 Manual De Instrucciones página 37

STEP 2: Install Windows
After setting up BIOS, you can start to install Windows
your system.
Using SATA / SATAII HDDs and eSATAII devices without NCQ and Hot Plug
functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "ATA/IDE Configuration" to [Enhanced], and then in the option
"Configure SATA as", please set the option to [IDE].
STEP 2: Install Windows
After setting up BIOS, you can start to install Windows
your system.
2.17 2.17 2.17 2.17 2.17 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking Technology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.
Please refer to the warning on page 6 for the possible overclocking risk before
you apply Untied Overclocking Technology.
ASRock ConRoe1333-eSATA2 Motherboard
® TM TM
Vista / Vista 64-bit OS on your system.
Advanced screen
® TM TM
Vista / Vista 64-bit OS on your system.
echnology echnology echnology echnology
® TM TM
Vista / Vista 64-bit on
IDE Configuration.
® TM TM
Vista / Vista 64-bit on
3 7 3 7 3 7
3 7 3 7