Installing And Removing The Sim Card; Installing And Removing The Micro Sd Card; Installing And Removing The Battery; Charging The Battery - Unnecto U168 Guia De Inicio Rapido

2. Installing and Removing the SIM Card
• Switch off the phone and remove the battery.
• Insert the SIM Card into the designated SIM 1 or SIM 2 slot.
• To remove the SIM Card; turn off the phone; remove the battery;
then remove the SIM Card from the SIM Card slot.
3. Installing and Removing the Micro SD Card
• Turn off phone before inserting or removing the Micro SD Card.
• To insert, slide the Micro SD Card into the Micro SD Card slot
(Micro SD Card facing up), located inside the back of the phone.
• To remove, pull the Micro SD Card out of the slot.
4. Installing and Removing the Battery
• Turn off the phone before removing the battery.
• Remove the back cover to access the battery.
• Place the battery into the phone; aligning the battery pins to the
phone's pins.
• To remove the battery, lift up the crease on the corner of the
phone.
5. Charging the Battery
• Plug the provided charger into a standard wall outlet.
• Plug the Micro USB charger into the USB port of the phone.
• When the phone is fully charged; unplug the charger from the
standard wall outlet and from the phone.
• If the phone automatically powers off or the battery indictor is low;
then you should immediately charge the phone.
6. First Time Startup
• Make sure one or two SIM cards are inserted before powering on
the phone.
• Make sure the battery is charged for at least 30 minutes before the
phone is powered on.
• Create or sign in an existing Google account for access to the
Android features.
4