User Instructions - Beeper RW7 Instalación Y Uso

USER INSTRUCTION
SAFETY PRECAUTIONS
• The reversing camera cannot in any circumstances be a substitute for the vigilance and responsibility of the driver.
• The reversing aid is for information only, the security of the vehicle and the people close to it is the responsibility of the driver. The driver must check if there are any obstacles or people near the
vehicle. We can not be held responsible in the case of a collision.
• It is the driver's responsibility to judge the distance of obstacles and they must adopt careful and cautious behaviour while driving so as not to endanger
persons or cause damage.
• The positioning of the screen should not interfere with the driver's vision, the recommended position is near the rear-view mirror but without obscuring it in
any way.
• If necessary, the screen must be cleaned using a slightly damp, soft cloth, do not press on the screen as this
may cause damage.
• If necessary, the camera lens must be cleaned using a soft damp cloth.
ACTIVATING AND DEACTIVATING THE SYSTEM
The system is activated automatically when the driver moves into reverse gear. It turns off automatically when the driver switches to another gear or moves into
neutral.
GUIDELINES FOR JUDGING DISTANCE
The BEEPER RW7 includes the display of guidelines for judging distances, on the screen (Fig. 1).
These guidelines are to help the driver to judge the distance between their vehicle and the obstacles they can see on the screen.
RÉGLAGE DES FONCTIONS DE LʼÉCRAN
Button #1 (Fig. 2) is for switch on and switch off the screen.
22
Fig.1
1
Fig.2