GrowMax Water PRO GROW 2000 L/h Manual De Instrucciones página 3

PRO GROW • Setup:
1. Main Unit
2. garden hose connector
3. Sediment filter
4. Green coconut carbon filter
5. garden hose connector
Before
Installation/Precaution!
*Note: Do not install the system where
the incoming water pressure may be
more than 90psi (6 k/cm2). If unsure,
check the pressure with a pressure
gauge, available
hardware store. If your water pressure
is more than 90psi (6 k/cm2) install a
pressure regulator, available at your
Grow Max Water dealer or hardware
store. Do not use with hot water.
How to install the PRO GROW unit:
1) Begin by connecting your garden hose to the quick connect adaptor
on the inlet (right side) of the system.
2) Connect your garden hose to the quick connect adaptor on the outlet
(left side) of the system.
3) Before using the system you will need to flush out any carbon fines
and particulates. You simply open the water and flush out the system
for 5 minutes letting the water go to the drain.
You are now ready to use your system!
at your local
(2)
5
4
1
3
2