Important Instructions; For Your Safety; Instructions For Assembly - Kettler Unix S Manual De Instrucciones

Important Instructions

GB
Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain infor-
mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these in-
structions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.

For Your Safety

! RISK!
While assembly of the product keep off children's
reach (Choking hazard - contains small parts).
!
RISK! The device requires a supply voltage of 230V, 50 Hz.
– Connect the power cord with a grounded protective contact
socket.
! RISK!
Any other use of the equipment is prohibited and may
be dangerous. The manufacturer cannot be held liable for da-
mage or injury caused by improper use of the equipment.
! RISK!
Instruct people using the equipment (in particular child-
ren) on possible sources of danger during exercising.
RISK!
!
Do not under any circumstances carry out electrical re-
pairs or alterations yourself. Always ensure that such work is
done by a properly qualified electrician.
! RISK!
disconnect the apparatus from the mains before doing
repair, maintenance or cleaning work.
! RISK!
Incorrect repairs and structural modifications (e.g. re-
moval or replacement of original parts) may endanger the sa-
fety of the user.
! RISK!
Heart rate monitoring systems may be inaccurate. Over
exercise may result in serious injury or death. If you feel faint
stop exercising immediately.
! RISK!
All electric appliances emit electromagnetic radiation
when in operation. Please do not leave especially radiation-
intensive appliances (e.g. mobile telephones) directly next to
the cockpit or the electronic controlsystem as otherwise values
displayed might be distorted (e.g. pulse measurement.
! RISK!
Ensure that the power cable is not pinched and that no-
one can trip over it.
! WARNING!
The training device should be used only for its
intended purpose, i.e. for physical exercise by adult people.
! WARNING!
Before beginning your program of training, stu-
dy the instructions for training carefully.
! WARNING!
Any interference with parts of the product that
are not described within the manual may cause damage, or
endanger the person using this machine. Extensive repairs
must only be carried out by KETTLER service staff or qualified
personnel trained by KETTLER.
! WARNING!
This training device is for home use only.
! WARNING!
If you lose the pulse signal, the performance of
the device will remain constant for approx. 60 seconds and
is then slowly adjusted downwards. Please check your pulse
measuring system (ear clip, hand pulse or chest belt) so that
the pulse signal of the electronics can be entered again.
■
The training device has been designed in accordance with

Instructions for Assembly

! RISK!
Ensure that your working area is free of possible sour-
ces of danger, for example don't leave any tools lying aro-
und. Always dispose packaging material in such a way that
it may not cause any danger. There is always a risk of suffo-
cation if children play with plastic bags!
! WARNING!
Please note that there is always a danger of in-
jury when working with tools or doing manual work. Therefo-
re please be careful when assembling this machine.
■
Ensure that you have received all the parts required (see
4
the latest standards of safety. Any features which may have
been a possible cause of injury have been avoided or made
as safe as possible.
■
The training device corresponds with DIN EN 957-1/-9, class
HA.
■
In case of enquiry, please contact your KETTLER dealer.
■
If the equipment is in regular use, check all its components
thoroughly every 1–2 months. Pay particular attention to the
tightness of bolts and nuts. This is particularly true for the
attachment of grip strap, running plate and fastening of the
handlebar and front tube.
■
Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment.
Base your program of exercise on the advice given by your
doctor. Incorrect or excessive exercise may damage your
health!
■
Before use, always check all screws and plug-in connections
as well as respective safety devices fit correctly.
■
Always wear suitable shoes when using.
■
Our products are subject to a constant innovative quality as-
surance. We reserve the right to perform technical modifica-
tions.
■
In choosing the location of the apparatus, ensure a sufficient
safety distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways (pa-
ths, doorways, corridors). The safety distance surrounding
must extend at least 1 meter further than the practice area.
■ Always observe the general safety rules and precautions for
working with electrical equipment.
■
Do not use a multiple power socket for the running belt. If an
extension cable is being used, ensure that it complies with the
VDE regulations.
■
Unplug the power cord of the device from the socket if not
used for a longer period.
■
Nobody may be in the moving range of a training person du-
ring training
■
This exercise machine may only be used for exercises indica-
ted in the training instructions.
■
This training device has to be set up on a horizontal surface
under all circumstances. Place rubber or straw mats under it
to deaden any noise or impacts. Only for appliances with
weights. Avoid powerful oscillations of the dumbbells!
■
When mounting the product please take the recommended
torque information into account (M = xx Nm).
check list) and that they are undamaged. Should you have
any cause for complaint, please contact your KETTLER dealer.
■
Before assembling the equipment, study the drawings careful-
ly and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
■
The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
■
The fastening material required for each assembly step is sho-