Mark MOVILED 183 W Instrucciones De Usuario página 7

Master/slave mode(auto-running、sound control)
.This mode will allow you to link up 32 units together without a controller.
.Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of
the units.Proper performance it may be necessary to use a terminator at the last fixture.
Set the desired master-mode- "Automatic program mode" or"sound controlled mode", for the
master-device, send the DMX address 1 for all slave-devices. Please refer to the instruction under
control board.
To set the pan to reverse
.Press the MENU until it shows RPOF.
.Use the UP/DOWN buttons show RPON, press ENTER to confirm.
To set the tilt to reverse
.Press the MENU until it shows RTOF
.Use the UP/DOWN buttons show RTON, press ENTER to confirm.
o set the LED readout to 180°,rotating
.Press the MENU until it shows RDOF.
.Use the UP/DOWN buttons show RDON, press ENTER to confirm.
Resume reverse Windows default
.Press the MENU until it shows DFON.
press ENTER to confirm。
D M X - pr oto c ol
DMX channel mode
Channel
1
2
3
4
5
MOVILED 183 W
.
Value
Pan
0-255 Pan movement 0~630
Tilt
0-255 Tilt movement 0~180
Pan Tilt speed
0-255 Pan & Tilt speed adjustment
Red
0-255 0-100% Red
Green
User Manual/Manual de uso
Function
Page 5
EN