Motion Detection; Mobile Application - nedis AHDS204CWT2 Manual Del Usuario

1. Connect
- Connect the cameras to the recorder with the coaxial cables using BNC connector
- Use the power splitter to power the cameras
- Connect the DVR to a TV or monitor using the preferred connector
- Connect the mouse using USB
- Connect the recorder to the internet using an Ethernet cable (if desired)
- Finally power up the recorder with the included power adapter.
2. Start Up
Press the start button and make sure the TV/monitor is set to the right input source. It will enter the real-time monitoring screen as
shown in figure "A":
3. Navigation
Right-click anywhere to access the "Right-click menu".
At first attempt login is required, default username is admin, default password is 123456
Use the left mouse button to navigate through the menu, right click in the menu to go back.
4. Shutdown
- Right-click anywhere to access the "Right-click menu", choose "Shut down system" and "Close", or
- Long press the startup button at the front panel (not recommended as it may damage the hard disk)
5. Recovery
At sudden system power off, the recording video will be stored automatically and after reboot, the recorder will automatically
resume to the status before power off.
6. Recording
In the Record Config menu you can set each camera's recording schedule. By selecting the preferred recording mode and clicking
individual timeslots or dragging to set a larger timezone or to cover multiple days at once.
White means that no recording will be done in this timeslot, blue means constant recording is done and green means that
recording will only happen after motion is being detected.
After a schedule is finished, it can easily be copied to one or more cameras. See figure "B"

7. Motion detection

In right-click menu - main menu - system settings - output mode the motion detection can be enabled and different settings can
be set:
- 3 different sensitivity settings
- exact action(s) to take: Record one or more channels, take snapshot, send Email or show triggered camera fullscreen.
- Area setting (motion mask): if set only motion in the highlighted areas trigger the set action(s).
8. Playback
When watching back earlier recordings, you get the interface like figure "C":
The 4 grey timelines at the bottom represent the 4 different channels. Differently coloured areas indicate different types of
recording (scheduled, manual, alarm or triggered by motion detection).
Drag the timeline left or right to scroll in time, use the mouse's scroll-wheel to zoom the timeline.
Double click on a specific time to play back the recording starting from the selected time.

9. Mobile Application

To access the DVR on your smartphone make sure the DVR is connected to the router and the network is configured correctly.
Download and open the App "N_EYE PRO", login or register your account or use local login if you only need access from within
the local network. Add device using the plus sign and select Network Device. Scan the QR-tag shown at the DVR under P2P Cloud
or copy the requested network parameters. The App can automatically detect the number of cameras on this DVR. After saving you
will see all cameras added. On the top-right corner specific cameras can be switched on and off. Other options in the App include
playback and manual recording on smartphone.
3