smartheart 01-553 Manual De Instrucciones página 18

MEMORY FUNCTION
Recalling Measurements in Memory
Select the desired user, 1 or 2, before memory review
The user icon displayed represents the memory bank where the
measurement result was stored.
This monitor stores and recalls up to 60 readings
per user. These measurements can be shared with
your physician or trained healthcare professional.
1. When the unit is OFF, press and release the M
button to select the memory bank for review.
Then press the POWER button to toggle
between user 1 or 2.
2. Press the M button to confirm selection. The unit
will first display the average of the last three
measurements, Fig 1.
3. Press the M button again to begin scrolling
through the saved measurements. Measurements
will appear on the display from most current
to oldest; the memory number will appear
flashing at the bottom of the screen next to the
measurement that was taken.
4. All results for a given measurement will display,
including measurement results, pulse rate,
Hypertension Indicator and Irregular Heartbeat
alert (if applicable). The date/time stamp is on
the top of the display, Fig 2.
18 • ENGLISH
.
Fig. 1
Fig. 2