ASROCK 939SLI32-eSATA2 Manual Del Usuario página 24

2.8 SA 2.8 SAT T T T T AII Hard Disk Setup Guide 2.8 SA AII Hard Disk Setup Guide AII Hard Disk Setup Guide AII Hard Disk Setup Guide
2.8 SA 2.8 SA AII Hard Disk Setup Guide
Before installing SATAII hard disk to your computer, please carefully read below
SATAII hard disk setup guide. Some default setting of SATAII hard disks may not
be at SATAII mode, which operate with the best performance. In order to enable
SATAII function, please follow the below instruction with different vendors to
correctly adjust your SATAII hard disk to SATAII mode in advance; otherwise, your
SATAII hard disk may fail to run at SATAII mode.
Western Digital
If pin 5 and pin 6 are shorted, SATA 1.5Gb/s will be enabled.
On the other hand, if you want to enable SATAII 3.0Gb/s, please remove the
jumpers from pin 5 and pin 6.
SAMSUNG
If pin 3 and pin 4 are shorted, SATA 1.5Gb/s will be enabled.
On the other hand, if you want to enable SATAII 3.0Gb/s, please remove the
jumpers from pin 3 and pin 4.
HITACHI
Please use the Feature Tool, a DOS tool, for changing various ATA features. Please
visit HITACHI's website for details:
http://www.hitachigst.com/hdd/support/download.htm
The above examples are just for your reference. For different SATAII hard
disk products of different vendors, the jumper pin setting methods may not
be the same. Please visit the vendors' website for the updates.
2 4 2 4 2 4
2 4 2 4
ASRock 939SLI32-eSATA2 Motherboard