Dell EMC CAVIUM QLE2660-DEL Guia Del Usuario página 95

3–Configuración de Fibre Channel
Configuración de un FA-PWWN
A continuación se muestra un ejemplo de la configuración del FA-PWWN:
HBA Desc.
FW Version
WWPN
WWNN
Link
===============================================================
1: Connection Options
2: Data Rate
3: Frame Size
4: Enable HBA Hard Loop ID
5: Hard Loop ID
6: Loop Reset Delay (seconds)
7: Enable BIOS
8: Enable Fibre Channel Tape Support
9: Operation Mode
10: Interrupt Delay Timer (100 microseconds)
11: Execution Throttle
12: Login Retry Count
13: Port Down Retry Count
14: Enable LIP Full Login
15: Link Down Timeout (seconds)
16: Enable Target Reset
17: LUNs per Target
18: Enable Receive Out of Order Frame
19: Enable LR
20: Enable Fabric Assign WWN
21: Commit Changes
22: Abort Changes
Enable Fabric Assign WWN Menu
1: Enable (Activar)
2: Disable (current)
: QLE2672 QLogic 2-port 16Gb Fibre Channel Adapter
: 7.04.00
: 21-00-00-OE-1E-11-4A-38
: 21-00-00-OE-1E-11-4A-38
: Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please enter selection: 20
QConvergeConsole
Version 1.1.3 (Build 22)
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please enter selection: 1
79 CU0354604-09 M