English - Milwaukee AG 13-125 XSPD Manual Original

TECHNICAL DATA
Angle Grinder
Production code
Rated input
Rated speed
D= Grinding disk diameter max.
d= Grinding disk hole diameter
b= Cutting disk thickness min. / max.
b= Grinding disk thickness max.
D= Grinding surface diameter max.
D= Wiring brush diameter max.
D
I GB
Thread of work spindle
Weight according EPTA-Procedure 01/2003
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Surface grinding:
Vibration emission value a
Uncertainty K=
Disk sanding:
Vibration emission value a
Uncertainty K=
For other applications, e.g. Abrasive Cutting-O Operations or Wire Brushing other vibration values could occur.
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications,
with di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.

English

12
h,SG
h,DS
AG 13-125 XSPD AGV 13-125
(220-240 V) XSPDE
(220-240 V)
4584 84 01... 4584 96 01...
...000001-999999 ...000001-999999
1250 W 1250 W
12000 min 12000 min
-1 -1
125 mm
125 mm
22,2 mm 22,2 mm
1 / 3 mm 1 / 3 mm
6 mm 6 mm
125 mm 125 mm
75 mm 75 mm
M 14 M 14
2,4 kg 2,5 kg
89,0 dB(A) 89,0 dB(A)
100,0 dB(A) 100,0 dB(A)
7,8 m/s 7,8 m/s
2 2
1,5 m/s 1,5 m/s
2 2
3,6 m/s 3,6 m/s
2 2
1,5 m/s 1,5 m/s
2 2
ANGLE GRINDER SAFETY WARNINGS
Safety Warnings Common for Grinding, Sanding, Wire
Brushing or Abrasive Cutting-O Operations:
a) This power tool is intended to function as a grinder,
sander, wire brush or cut-o tool. Read all safety warnings,
instructions, illustrations and speci cations provided with
this power tool. Failure to follow all instructions listed below may
result in electric shock, re and/or serious injury.
AGV 13-115 AGV 13-115
XSPDE XSPDE
(110-120 V) (220-240 V)
4584 92 01... 4586 65 01...
...000001-999999 ...000001-999999
1250 W 1250 W
12000 min 12000 min
-1 -1
115 mm
115 mm
22,2 mm 22,2 mm
1 / 3 mm 1 / 3 mm
6 mm 6 mm
115 mm 115 mm
75 mm 75 mm
M 14 M 14
2,4 kg 2,4 kg
89,5 dB(A) 89,0 dB(A)
100,5 dB(A) 100,0 dB(A)
6,8 m/s 7,8 m/s
2 2
1,5 m/s 1,5 m/s
2 2
4,5 m/s 3,6 m/s
2 2
1,5 m/s 1,5 m/s
2 2