Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Using the Aux In input
Use the audio cable included with this speaker to
connect the audio output from your device to the Aux
of
In audio input on the speaker's back panel (you might
ress
need to open the rubber flap protecting the jack). The
he left
nal.)
speaker automatically switches to the Aux In audio.
t
If you're using a single speaker, the Status indicator
aker
turns white you're using the Aux In input. If you're
that
you
using two, the Status indicator turns blue, and the
d the
stereo link with the other speaker is turned off while
gives
you're using the Aux In input.
To listen to Bluetooth audio again, unplug the cable
from the speaker's Aux In jack.
Using Multi-Mode Lighting
The Lighting Mode and Color buttons give you
control over this speaker's built-in multi-mode
lighting. You can use the lighting whether the
speaker's on or off.
When the speaker's off...
Press the Mode button to turn white light on or off.
When the speaker's on...
Press the Mode button to cycle through the multiple
lighting modes:
Solid on
choice—just press the Color button to see the
options.
Breathe mode
your color choice (press Color to see the options).
Dance mode
follow the beat of your music and cycle through
the colors.
Press the Color button to cycle through the 8
available colors for Solid on and Breathe modes.
gives you a solid light of your color
slowly fades up and down light in
and
Party mode
make the lights
Speaker back
IMPORTANT: The Aux In
input plays your music on
one speaker only. For two-
speaker stereo, you must
use Bluetooth with two
speakers linked for stereo
playback.
Speaker top
Multi-Mode Lighting Demo
This speaker has a lighting
demo mode that shows off all
of the lighting options.
To activate/deactivate the
lighting demo: Make sure
the speaker's on. Then press
and hold Mode and Color at
the same time for 10 seconds
(until the demo light show
starts or stops).
7
Tabla de contenido
