Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Working without personal protection equipment.
Drive for lifting goods or people.
Danger Zones
Operational
condition
Life phase
Transport
Start-up
Operation
Maintenance
Prior to operation
· Check the oil level. If necessary add oil to fill up the oiler. (Line oiler or service unit).
· Clamp the drill into three-jaw chuck.
· Connect air hose. (In order to remove contaminants, blow out the air hose before connecting).
Actuate valve and begin the drilling operation. (Speed can be regulated by opening the valve
more or less).
When having finished the operation
· Shut the valve.
· Turn off compressed air and disconnect the air hose.
· Unclamp the drill if necessary.
· Check the oiler
24
Normal function
Transport of the
machine in an
inoperable
condition
Operating with
the
machine with
designated tools
The machine is
only
working when
without intended
valve is
actuated
Machine moves
tool
Regular change of
vanes
Operation on a
Service Unit
OPERATION INSTRUCTIONS
IMPROPER USE
Malfunction
Improper use
Transport of the
Drop of the
machine in an
machine
condition
Operating with
unknown
not approved
Machine runs
Valve is blocked
while open
actuating
Tool blocks
-
Failure of the
machine
Expected use
unknown
operable
unknown
tools
unknown
unknown
unknown
-
unknown
unknown
-
Tabla de contenido
