BLUE SKY PHG8732SS Manual Del Usuario página 17

STEP 10
GG
Slide one 8 mm washer [GG] over each
FF
of the exposed ends of the reflector
spacers [FF], which are sticking out of
the head assembly [C].
Place the reflector assembly on the
three spacers.
Slide one 8 mm washer over each
of the exposed ends of the reflector
spacers, which are sticking through the
top of the reflector assembly.
KK
Then securely tighten a wing nut [KK]
GG
to each of the threaded ends of the
reflector spacers.
Do not overtighten.
FF GG
KK
17