How To Adjust A Setting - LDLC M27 Manual Del Usuario

HOW TO ADJUST A SETTING

BRIGHTNESS/ CONTRAST
BRIGHTNESS
CONTRAST
ACTIVE CONTRAST
PRESET MODE
BLUE LIGHT FILTER
INPUT SETTING
INPUT SETTING
AUTO SEARCH
COLOR SETTING
WARM
NATURE (6500K)
COOL
USER
IMAGE SETTING
AUTO ADJUST
ASPECT RATIO
H-POSITION
Adjust the brightness value of the display according to your preference.
Select「BRIGHTNESS」option to adjust the brightness value.
Adjust the contrast value of the display according to your preference.
Select「CONTRAST」option to adjust the contrast value.
Optimal setting for high contrast images or videos. The dark and light
areas of the image are automatically detected, and the contrast is
enhanced to provide a clearer, sharper image. Also, you may select
the「ACTIVE CONTRAST」option.
Select the preset mode according to your preference: PC/ MOVIE/
GAME/ ECO
Adjusts the blue light quantity emitted by the screen. Adjustment value
varies from 0 to 100. Set on 100 by default.
Select the 「INPUT SETTING」option to change between analog
(VGA) or Digital (DVI/HDMI) source. Enter the option and select
Analog or Digital.
From the Signal Selection menu, select the 「AUTO SEARCH」option
to activate or deactivate the automatic signal search function.
HDMI Input only]
Adjust the color temperature value of the display according to your
preference: WARM /NATURE/ COOL.
Move the cursor to the User option and select it,
1. To adjust the red, enter the「R」option and adjust the level.
2. To adjust the green, enter the「G」option and adjust the level.
3. To adjust the blue, enter the「B」option and adjust the level.
The auto adjustment function is used to optimize the 「H-POSITION」,
「V-POSITION」,「CLOCK」,and 「PHASE」.
When the aspect ratio of screen is distorted, you may make
adjustments by using this function.「FULL」indicates full screen
display, which does not ensure the image is shown as is or in initial
scale. 「FIT」indicates scaling by the proportion of original images,
which may cause the screen showing black bands.
Select the 「H-POSITION」option to shift the screen image to the left
or right. Enter the option and adjust the level.
[For DVI/
[For VGA Input only]
[For VGA only]