User Manual - PNI GREENHOUSE P10 Manual De Usuario

GENERAL DESCRIPTION
The PNI GreenHouse P10 photovoltaic solar panel with built-in 1500mAh battery and 12V output
was created to power the hunting cameras and other electrical devices mounted in remote locations.
For hunting cameras, the solar panel has a back-up role (replaces the batteries inside the camera).
The camera is powered with priority from the battery pack integrated into the solar panel as long
as it is charged. When the battery from the solar panel is discharged, the power goes back to the
batteries inside the cameras.
INSTALLATION INSTRUCTIONS
PNI GreenHouse P10 comes with mounting accessories included: strap and adjustable support
with screws. In the package, you can also find a power supply with which you can charge the
battery before going out in nature, and a cable to connect the panel to the hunting camera.
We recommend
approximately 45 degrees (ideally the sun should be perpendicular to the panel).
For a correct charging of the solar panel, it is recommended to have sun for a minimum of 4 hours
a day.
RECOMMENDATIONS
If there is no sun for a longer period (1-2 weeks), we recommend charging the panel with the help
of the included power adapter to maintain the battery at optimum operating capacity.
TECHNICAL SPECIFICATIONS
Battery
Solar panel efficiency
Solar panel max. output power
Output voltage
Max. output current
AC adapter
Battery fully charged by DC
Solar panel dimensions
Waterproof
PACKAGE CONTENTS
• Solar panel with built-in rechargeable battery
• AC power adapter
• Clamping strap
• Mounting bracket
• Power cable for hunting camera

User manual

mounting the panel facing the sun,
Lithium-Ion 2x 18650, 1500mAh
16%-17%
2W
12V
1600mA
Input: 230V
Output: 12V 2.0A
Up to 4 hours
141 x 158 x 27 mm
IP54
with an inclination of
2