QP-Audio USB Serie Manual De Usuario página 3

5
8
ENGLISH
FEATURES:
1.-GRAPHIC EQ
5 Band graphic equalizer
2.-PLAYER LEVEL
Volume control for digital audio player
3.-MICROPHONE INPUT
Balanced XLR input / unbalanced jack input
for microphones
1
4.-MICROPHONE LEVEL
Volume control for microphone input
5.-LINE INPUTS
3
Balanced XLR input / unbalanced cinch line input
6.-LINE IN LEVEL
2
Volume control for line input
7.-MASTER VOLUME
4
Mastervolume control
8.-LINE OUTPUTS
Balanced XLR and jack mono outputs. The mixed
6
input signals are split before the power amplifier unit and sent
to this output. You can use this output, for
example, to drive additional active speakers or
7
amplifiers with the mixed input signals.
Important: This output signal is determined before
the master tone controls and the master tone
controls and the master volume, so it is independent of
9
other settings.
9.-TREBLE
10
Treble control
10.-BASS
Bass control
14
11.-POWER SWITCH
12.-SWITCH 110V / 230V
12
13.-POWER CONNECTION SEAT
Power connector socket (IEC plug) and fuse holder.
11
The power connector must be disconnected whenever
the fuse is replaced. If the fuse burns out repetedly,
the unit must be inspected by a specialist
14.-CLIP / POWER LED
If the CLIP LED blinks or is on constantly,
reduce volume
13
.
2