Pin Tucking Thread And Fabric; Machine Setting; Sewing - Janome 9102D Manual De Instrucciones

1
HA-1 SP No.11 or No.14
2
5
6
72
1
3
4
3
2
PIN TUCKING
Refer to page 62 (Narrow Hemming) for thread
*
tension balance adjustment.
1 Pin tucking
Thread and Fabric
Fabric
Needle thread on the
Light to
right
Medium
Upper looper thread
Fabric
Lower looper thread

Machine Setting

1
Remove the needle on the left-hand side
2
Needle plate setting knob : R
3
Upper knife : Down

Sewing

Turn off the power switch.
Remove the needle on the left-hand side.
1
Deactivate the upper knife.
Turn on the power switch, then sew the folded edge
while guiding along the guide line.
1
Folded edge
2
Guide line on the needle plate
3
Right needle position line on the presser foot
4
Left needle position line on the presser foot
5
Right side of fabric
Open the fold flat and press the pin tucks to one side.
NOTE: After you finish sewing,return the upper knife
to rhe original position.
6
Pin tucking
Thread
Synthetic : No. 60~80
Silk : No. 50~80
Synthetic : No. 60~100
Silk : No. 50~100