Warning Symbols; General Safety Instructions - SENSEA NEO Serie Instrucciones De Montaje, Utilización Y Mantenimiento

WARNING SYMBOLS

Read the instructions
carefully.
Class II. Double
insulation,
for the luminaire.
LED 220-240 V
IRC 80 - 6500 °K
INSTALLATION
WARNING:
!
The electrical installation must only be carried out by professionals in
accordance with local regulations.
! WARNING:
This unit must be installed in zone 2 only or in an outside zone, in
accordance with local regulations. If the layout of your bathroom is
di erent from the diagram above, contact an expert for the
installation. The mirror must be powered by a circuit that is protected
by a residual current monitor (RCM) less than or equal to 30 mA.
This mirror is xed and it is not mobile. It must be xed to the wall by
fastening elements such as metal hooks, cap screws or nuts. This
device must be connected to the power supply via a Class 2, IP44
junction box in accordance with local regulations, and with terminals
with a nominal section equal to 2.5 mm . Once installed in its
position of use, the connecting cables must not be visible, accessible
or under stress.
!
Make sure the power outlet is out of volume 2.

GENERAL SAFETY INSTRUCTIONS

Read this user manual carefully before using the appliance, and keep it for future reference and pass it
on to a third party if necessary.
WARNING:
!
order to reduce the risk of re, electric shocks and personal injury.
1. General Instructions
No-one, and in particular no child, must be in the vicinity of the workplace. Check that the electrical
speci cations of this luminaire are compatible with your installation.
WARNING:
!
- The power supply must be switched o before installation, maintenance or cleaning. Remove the fuse or
de-activate it, and make sure that it cannot be re-activated.
- Before drilling a hole, make sure that there is no risk of drilling through an existing non-visible cable or pipe.
- Minimum distance between the mirror and illuminated objects must be 0.5 metre.
V2
Classe 2
Protection rating:
IP24 Protected against solid objects greater than 12 mm.
Protected against splashing water from
all directions.
Compliance with European
Regulatory Requirements.
Lights not designed to be
installed directly on normally
ammable surfaces.
outside zone
When using electrical appliances, comply with basic safety precautions in
outside zone
zone 2
zone
1
60 cm
2.25 m
3 m
zone 0 zone 0
*
Minimum distance between
the mirror and any illuminated
object (0.5 metre).
V2 / out of volume
installation in volumes 2
and out volume
outside zone
zone 2
zone
1
60 cm
FR
ES
PT
IT
EL
PL
RU
UA
RO
BR
EN