Pre-Installation; Planning Installation; Tools/Materials Required; Parts Required - Conglom QK23 Manual Del Usuario

Pre-Installation

PLANNING INSTALLATION

You may choose to install this sink either below the counter (undermount) or above the counter (topmount) . You
must install this sink in a counter at least 36 in . (914 mm) wide with a solid surface that has a minimum thickness
of 3/4 in . (19 mm) .
Protect the entire surface of the product during installation to prevent damage .

TOOLS/MATERIALS REQUIRED

Measuring tape
Saber-saw or
Jig-saw
Silicone sealant
Flathead
screwdriver
Safety gloves
PARTS REQUIRED (NOT INLCUDED)
NOTE:
Parts not shown to actual size.
QK23
Carpenter's square
Electric drill with 3/8 in .
(10 mm) drill bit and 1 in .
(25 .4 mm) and 1 3/8 in . (35 mm)
hole saw for faucet hole drilling
Pencil
Hacksaw
Tail pipe (2)
4
UNDERMOUNT
Supply lines (2)
TOPMOUNT
Wrenches (2)
Pipe wrench
Thread Seal
Safety goggles