Tabla de contenido
Idiomas disponibles
Idiomas disponibles
account the working conditions and the work to be performed. Use of the power tool for operations different
from intended could result in a hazardous situation.
5. Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
SPECIAL REQUIREMENTS FOR ROTARY HAMMER
1. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
3. Hold Power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric shock.
4. Wear a dust mask. Do not inhale the harmful dusts generated in drilling or chiseling operation. The dust can
endanger the health of yourself and bystanders.
5. Always hold the body handle and side handle of the power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even dangerous operation.
6. Before beginning work, check the working area (e.g. with a metal detector) to ensure that no concealed
electric cables or gas and water pipes are present. Contact with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property damage or may
cause an electric shock.
7. In case of damages the replacement of the plug or the supply cord shall always be carried out by the
manufacturer of the tool or his service organization.
8. Do not touch the bit during or immediately after operation. The bit becomes very hot during operation and
could cause serious burns.
9. Do not use the power tool with a damaged cord. Do not touch the damaged cord and pull the plug from
the outlet when the cord is damaged while working. Damaged cords increase the risk of an electric shock.
Warning: Reduce the working time to avoid risks related with too much vibration.
Rotation and hammering function
- Drilling anchor holes
- Drilling holes in concrete
- Drilling holes in tile
Rotation only function
- Drilling in steel or wood (with optional accessories)
Hammering only function
- Light-duty chiseling of concrete, groove digging and edging.
1. Power source
Ensure that the power source to be utilized conforms to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position. If the plug is connected to a power receptacle while the
power switch is in the ON position, the power tool will start operating immediately, which could cause a serious
accident.
3. Extension cord
When the work area is removed from the power source, use an extension cord of sufficient thickness and rated
capacity. The extension cord should be kept as short as practicable.
4. Mounting the drill bit (SDS-plus)
CAUTION:
To prevent accidents, make sure to turn the switch off and disconnect the plug from the receptacle.
GB
APPLICATIONS
PRIOR TO OPERATION
20
Tabla de contenido
