JVC KD-A735BT Manual De Instrucciones página 19

Using the SETTINGS menu
1 Enter the "Hands-Free" menu.
2 Select <SETTINGS>.
The following settings are applicable to the paired device. If another device is paired, perform the
settings again.
Menu item
P.BOOK SEL * [PB IN PHONE]: The unit browses the phonebook of the connected phone.
PB IN UNIT: The unit browses the phonebook registered in the unit. (You can
copy the phonebook memory using <P.BOOK WAIT> (
AUTO ANSWER ON: The unit answers incoming calls automatically.
[OFF]: The unit does not answer incoming calls automatically.
RING TONE [IN UNIT]: The unit rings to alert you when a call/text message comes in.
– CALL: Select your preferred ring tone (TONE 1 — 5) for incoming calls.
– MESSAGE: Select your preferred ring tone (TONE 1 — 5) for incoming text
messages.
IN PHONE: The unit uses the connected phones' ring tone to alert you when a
call/text message comes in. (The connected phone will ring if it does not
support this feature.)
RING COLOR
COLOR 01 — 29 [06]: Select your preferred color for incoming call/text
message alerts.
OFF: Cancels.
NR/EC MODE [ON]: Turns on the Noise Reduction and Echo Cancellation of the connected
microphone for clearer sound.
OFF: Cancels.
MIC LEVEL
(01— 03) [02]: The sensitivity of the microphone increases as the MIC level is
increased.
MSG NOTICE
[ON]: The unit rings and "RCV MESSAGE" "[Device Name]" appears to alert you
of an incoming text message.
OFF: The unit does not alert you of an incoming text message.
* Selectable only when the connected phone supports PBAP.
Selectable setting (Initial: [XX])
Default ring tone is different according to the paired device.
Bluetooth mobile phone
3 Repeat this step to perform the necessary
settings.
To return to the previous menu, press
To exit from the menu, press MENU.
.
page 25).)
ENGLISH | 19