Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
Hydraulic Cylinder Pressure ................................. 2320 psi
Oil Capacity .................................................. 3.4 qts. (3.2 l)
Input ........................... 120 Volt , 60 Hz, AC Only, 15 Amps
KNOW YOUR LOG SPLITTER
See Figure 2.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BLEED SCREW
Loosen the bleed screw to ensure the smooth flow of air in
and out of the oil tank.
HYDRAULIC CONTROL LEVER
Push down on the hydraulic control lever and the ram starts
pushing the log into the wedge.
LIFT HANDLE
The lift handle makes rolling the log splitter from one location
to another simple and easy.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PACKING LIST
Log Splitter
Wheel (2)
Hardware Bag
Operator's Manual
FEATURES
Log Capacity Diameter, maximum ............................ 12 in.
Log Capacity Diameter, minimum ............................... 4 in.
Log Capacity Length .............................................. 20.5 in.
RESET/OVERLOAD BUTTON
If the motor is overloaded the machine will shut off. Remove
the load and push the reset/overload button to restart the
machine.
OIL DRAIN BOLT WITH DIPSTICK
Oil drain bolt with dipstick makes checking and changing
hydraulic oil easy.
SIDE SUPPORTS
Side supports on each side of the work table keep logs
resting securely on the log splitter.
WORK TABLE
Provides surface to support log prior to splitting operation.
ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration
or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
CAUTION:
Failure to loosen the bleed screw prior to operation of this
product may cause the seals in the hydraulic system to
blow out. Blown seals could cause permanent damage
to the log splitter.
8 — English
Tabla de contenido
