Tabla de contenido
Idiomas disponibles
Idiomas disponibles
A.
B.
C.
CAPABILITIES
Will shred: Paper, staples and plastic credit cards
Will not shred: CD/DVDs, adhesive labels, continuous form paper, transparencies,
newspaper, cardboard, paper clips, laminates, file folders, X-rays or plastic other than
noted above
Paper/card shred size:
Micro-Cut .................................................................7/64 in. x 25/64 in. (3mm x 10mm)
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
manual. Read the entire instruction manual before operating shredders.
to off or unplug when not in use.
openings. If object enters top opening, switch to Reverse (
DO NOT use aerosol products, petroleum based or aerosol lubricants on or
near shredder. DO NOT USE "CANNED AIR" OR "AIR DUSTERS" ON SHREDDER.
Vapors from propellants and petroleum based lubricants may combust causing
serious injury.
Do not place near or over heat source or water.
2
D.
KEY
A. Safety Lock
E
To set lock slide
button down
B. See safety instructions
C. Pull-out bin
D Paper/card entry
Maximum:
Sheets per pass ........................................................................................................... 10*
Cards per pass ............................................................................................................... 1*
Paper entry width ........................................................................................9 in. (223mm)
*8.5"x11", 20lb., (75g) paper at 120V, 60Hz, 3.5Amps; heavier paper, humidity or other
than rated voltage may reduce capacity. Maximum recommended daily usage rates: 150
sheets per day; 10 credit cards
) to back out object.
E. Control Panel and LEDs
1. Reverse
2. ON/OFF (green)
3. Forward
4. Overheat (red) and
Remove paper (yellow)
5. Bin open (yellow)
10 sheets per pass to avoid jams.
voltage and amperage designated on the label. The grounded outlet or socket
transformers, or extension cords should not be used with this product.
ENGLISH
Model 10MC
Tabla de contenido
