Items Supplied And Packaging; Operating - Medisana 61200 Instrucciones De Manejo

2 Operating

Thank you very much for your confidence in us and congratulations!
With this Double Size Heated Underblanket HU 660 you have purchased a quality
product by MEDISANA. To ensure the best results and long-term satisfaction with
your MEDISANA Double Size Heated Underblanket HU 660, we recommend that
you read the following operating and maintenance instructions carefully.

2.1 Items supplied and packaging

Please check first of all that the unit is complete and is not damaged in any way. If
in doubt, do not use the appliance. Send it to a service point.
The following parts are included:
• 1 MEDISANA Double Size Heated Underblanket HU 660 with 2 removable controls
• 1 Instruction manual
The packaging can be reused or recycled. Please dispose properly of any packaging
material no longer required. If you notice any transport damage during unpacking,
please contact your dealer without delay.
WARNING
Please ensure that the polythene packing is kept away from the
reach of children! Risk of suffocation!
2.2 Operation
You can use the MEDISANA Double Size Heated Underblanket HU 660 to gently
warm and relax your whole body. Using the blanket stimulates the circulation in
areas of tense muscle and promotes a sense of well being after a strenuous day.
The Double Size Heated Underblanket provides a pleasantly warm bed and
features two independently controllable warming zones, allowing you to relax and
get to sleep quickly. Spread the blanket out flat on top of the mattress and fit a sheet
over it. When using the blanket, you must make sure that it does not get creased,
folded or rucked up. The blanket may only be used when it is spread out flat. The
Double Size Heated Underblanket is equipped with 2 electric temperature control
units (one unit per warming zone), which regulate the temperature according to the
chosen setting.
Make sure, that the connection cables of the control units are properly connected
to the plugs of the heated underblanket. The connecting plugs are located in the left
and right corners of the printed top side. Plug the unit into the mains outlet and
move the slider control of each control unit from position 0 to position 1. The power
LED will light up in green firstly, then will beep 3 times and then flash in green,
before the LED will change to orange colour (=warm up phase). After reaching the
desired temperature level, the LED will light up in green. After a few minutes you
will be able to feel the blanket getting noticeably warmer. If you require a higher
temperature setting, move the switch to the next positions 2 or 3 or the maximum
heat setting, position 4. If the heated underblanket gets too hot for you, move the
slider back to position 3, 2 or 1. After a short time, the device will cool down. After
reaching the desired temperature level, the unit will reheat in irregular intervals
(LED will change from green to orange and back to green). To switch the unit off,
move the switch back to position 0. The power LED will go out, indicating that the
2 Operating
11
GB