Blower Operation; Dry Pick Up Operation - Craftsman CMXEVCVVJC809 Manual De Instrucciones

ENGLISH
Fig. 5
WARNING:
COMPLETED VACUUMING, FLIP THE ON/
OFF SWITCH TO THE 'O' OFF POSITION
AND UNPLUG THE POWER CORD FROM THE
OUTLET. O = OFF

BLOWER OPERATION

This Wet/Dry Vacuum has blowing capabilities.
To use the blower feature follow the instructions
listed.
WARNING:
SAFETY GOGGLES COMPLYING WITH ANSI
Z87.1 (OR IN CANADA, CSAZ94.3) WHEN
USING BLOWER.
WARNING:
CLEAR FROM BLOWING DEBRIS.
WARNING:
MASK IF BLOWING CREATES DUST THAT
MIGHT BE INHALED.
WARNING:
POWER CORD IS DISCONNECTED FROM THE
OUTLET.
CAUTION:
COLLECTION TANK IS EMPTY BEFORE
USING AS A BLOWER. CLEAR ALL DIRT AND
DEBRIS FROM THE HOSE AND COLLECTION
TANK.
12. Remove the hose
9
.
6
ONCE YOU HAVE
I = ON
ALWAYS WEAR
KEEP BYSTANDERS
WEAR A DUST
VERIFY THAT THE
MAKE SURE THE
13 from the vacuum port
13. Insert the larger end of the hose
1
the blower port
power head and lock into place. Fig. 6.
Fig. 6
14. Choose the desired accessory and insert
onto the end of the hose
Fig. 7
15. Before turning on the vacuum, firmly hold
onto the loose end of the hose. Plug the
power cord into the outlet. Turn the motor
on by flipping the switch to the 'I' ON
position.
WARNING:
COMPLETED BLOWING, FLIP THE POWER
SWITCH TO THE 'O' OFF POSITION AND
UNPLUG THE POWER CORD FROM THE
OUTLET.
FILTER INSTALLATION AND CLEAN
UP

Dry Pick Up Operation

NOTICE: Clean or change the filter regularly
for best performance. ALWAYS USE THE
CARTRIDGE FILTER FOR DRY VACUUMING. If
the machine is used without the cartridge filter,
the motor will burn out and the warranty will be
voided. Always keep spare filters on hand.
NOTICE: The filters included are made of high
quality materials designed to stop small dust
particles. The cartridge filter should be used
13
into
on the back of the
13 . Fig. 7.
ONCE YOU HAVE