Idiomas disponibles
Idiomas disponibles
RINGWAY
Congratulations for purchasing this product. We strongly
recommend you to carefully read this instruction manual.
ADVISE HOW TO USE AND MAINTAIN YOUR HELMET
Take care of your helmet; it will protect you in case of crash. Do
not modify the structure of the helmet since it is designed to
absorb the shock energy in a collision through the destruction of
some of its parts. Do not expose your helmet to temperatures
higher than 50ºC as this could affect the protection afforded by
the helmet. Direct contact with paints, adhesives, fuels, solvents
or corrosive products may damage the structure of the shell.
HELMET SIZE
(A) Surround your head just above the ears with a measure tape
and you will obtain a measure in centimetres. Choose a helmet
that corresponds to this size. If the helmet is too tight, opt for a
larger size. If you hesitate between two sizes, opt for the tightest
one as the helmet internal lining stretches when being worn.
PUTTING THE HELMET ON
Adjust and fasten the chinstrap correctly and make sure that
there is no clearance between the chinstrap and the chin. When
the helmet sits properly on your head, it protects both the
forehead and the neck (B). Do not incline the helmet backwards
(C) nor forwards (D).
MAINTENANCE OF THE VISOR
Use a soft cloth and mild soap solution to remove dirt from the
visor and dab it cautiously with a dry cloth. Avoid the use of any
kind of solvents, alcohol or abrasive products on the visor. Badly
scratched or damaged visors will affect vision and should be
replaced before riding for safety reasons.
REMOVING / FITTING THE SUN VISOR
Removing: Lower the sun visor and pull it forwards until it
O W N E R S M A N U A L
releases from its fixing (E).
Fitting: Make sure that both fixing sockets between the internal
lining and the shell are in the lower position. Insert the two ends
of the sun visor into the sockets until they lock.
Operate the sun visor a few times to ensure correct function (F).
REMOVING / FITTING THE CLEAR VISOR
Removing: Open the visor totally and move the part shown in
blue as indicated by the arrow until releasing the visor from its
fixing (G). Repeat this step on the other side.
Fitting: Repeat the above steps in reverse order. Operate the visor
a few times to ensure correct function.
CLEANING THE INTERNAL LINING
This helmet is provided with a removable and washable lining.
Please wash by hand with water and mild soap and let dry,
avoiding direct exposure to sunlight.
REMOVING / FITTING THE INTERNAL LINING
Removing: Remove the cheek pad by detaching the buttons on
the front (H) and back sides (I) and pulling it inwards. Repeat the
above step on the other cheek pad. Then remove the central
lining by pulling gently the lining of the back side (J) and of the
front side of the helmet (K).
Fitting: Repeat the above steps in reverse order.
REFLECTIVE STICKERS
If you want to use your helmet in France, you must mount the four
reflective stickers as described on the packaging in accordance
with the national regulation in force (L).
