Before Starting; Connections - Wilks USA TX750 Manual Del Usuario

TX750 / TX750i

Before starting

Note: the washer will automatically shut down if insufficient oil is detected.
Add fuel:
01. Open the filler cap
02. Fill with unleaded petrol
up to the filter
03. Replace filler cap

Connections

01. Connect the high pressure hose to the gun 'A'
02. TX750: Connect the high pressure hose to pump 'B'
03. TX750i: Connect the high pressure hose to the reel 'D' and the reel hose to 'B'
04. Connect a mains supply hose to the water inlet 'C'
6
Add oil:
01. Locate the filler bungs on either side of the engine
02. Place washer on a level surface
03. Open the oil filler bung
04. Fill with 10W-40 semi-synthetic oil up to the threads
05. Replace oil filler bung
A
D
© Wilks-USA
English
C
B