Powerboost Function; Use Limitations; To Activate; To Deactivate - NEFF T4 D 0 Serie Instrucciones De Uso

Powerboost function

The Powerboost function can be used to heat large amounts of
water more quickly than the power level

Use limitations

This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see picture).
Otherwise, the display of the selected hotplate will flash
; then it will automatically set the power level
In hotplate number 1, the Powerboost function can be activated
at any time.


Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
as a timer.

Turning off a hotplate automatically

Enter the cooking time for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
How to program
Select the required power level.
1.
Press the symbol. The
2.
up. is displayed in the time program function display.
To select another hotplate, press the
until the indicator for the desired hotplate lights up.
Press the + or - symbol on the time program function.
3.
The basic setting appears:
+symbol: 30 minutes.
- symbol: 10 minutes.

4. Press the + or - symbol until the required cooking time
appears.
After a few seconds, the cooking time begins to count down.
Once the time has elapsed
The hotplate switches off. The beep sounds, and in the time
program function display
indicator lights up on the hotplate display. Pressing the
symbol turns off the indicators and stops the beeping.
22
.
.


indicator of the hotplate lights
symbol several times

appears for 10 seconds. The

To activate

Select the power level
1.
2. Press the + symbol. On the hotplate, the
appear.
The function has been activated.
and

To deactivate

Press the - symbol. The
hotplate will return to the
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Changing or cancelling the time
Press the symbol several times until the required
indicator lights up. Change the cooking time using the + or -
symbols, or set to
Notes
If a cooking time has been programmed for several
hotplates, it can be set to display all the time values. To do
this, press the
for the required hotplate lights up.
Any cooking time can be programmed for up to 99 minutes.

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time can be changed or cancelled for any
hotplate:
Press the symbol several times until the required
indicator lights up. Change the cooking time using
the + or - symbols, or set to

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the symbol several times until the
1.
lights up. is displayed in the time program function
display.
Press the + or - symbol on the time program function.
2.
The basic setting will appear.
+symbol: 10 minutes.
- symbol: 5 minutes.
Set the time required using the + or - symbols.
3.
After a few seconds, the timer will start to count down.
.
indicator will
symbol will disappear and the
power level.
.
symbol several times until the
.
indicator
indicator