Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WINDOW REQUIREMENTS
1
These instructions are for a standard
double-hung window. ou will need to modify
them for other types of windows.
The air conditioner can be installed without the
side curtain panels if needed to fit in a narrow
window. See the window opening dimensions.
All supporting parts must be secured to firm
wood, masonry or metal.
The electrical outlet must be within reach of the
power cord.
Follow the dimensions in the table and
illustration for your model.
31 1/4" - 40"
(With side curtain panels)
STORM WINDOW REQUIREMENTS
2
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly. To adjust for this,
attach a piece of wood to the sill.
WOOD PIECES
WIDTH: 2
LENGTH: Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness, place a
piece of wood on the sill to make it 1/2 higher
than the top of the storm window frame or the
vinyl frame.
Attach securely with nails or screws provided
by the installer.
1/2 higher
than storm
window
frame
Storm window
frame
Installation Instructions
20 1/4"
1/2 higher
than vinyl frame
(on some windows)
Wood
Sill
Vinyl frame
PREPARE THE AIR CONDITIONER
3
Remove two screws on each side of the case.
A
Save the screws for use later. Two screws
on the top of the case are covered by black
adhesive. Remove adhesive and screws.
Insert a flat head screw driver between the
B
front grille and the metal case along the sides.
Gently pry the grille from the case. NOTE: Cover
the flat head screw driver with tape to prevent
scratching the case.
Using the handle on bottom front of the air
C
conditioner, pull air conditioner out of the case.
The air conditioner is very heavy so make sure
that it will be resting on a sturdy surface.
9
Tabla de contenido
