Altair AL-2150 Manual Del Usuario página 2

Thank you for purchasing this Altair Lighting LED wall lantern with photocell and optional
arm kit. This product has been manufactured with the highest standards of safety and
quality.
FEATURES:
•
Easy to install
•
Energy Star Certified
•
Photocell light control turns on the LED lights at nighttime and turns off the lights at
daytime.
•
Reliable nationally recognized lighting-class LEDs
•
Optional arm
•
Replaceable LED driver
NOTE: This product is an LED light fixture. It contains its own LED light sources and does
not require the purchase of light bulbs.
SPECIFICATIONS:
•
Dimensions without arm
•
Dimensions with arm
•
Electrical Requirements:
•
Maximum Wattage:
GENERAL:
•
Questions, Problems, Missing Parts? Please contact our Customer Service Team in
1-800-787-1021
English or Spanish at
through Friday, between 8 AM and 5 PM Pacific Standard Time. You may also
contact us via e-mail at [email protected].
•
KEEP this instruction manual.
•
KEEP your receipt for proof of purchase.
TOOLS REQUIRED FOR INSTALLATION AND
ASSEMBLY (NOT INCLUDED):
Safety
Goggles
Electrical
Tape
Page 2
15.25 in (H) x 8.75 in (W) x 11 in (Ext)
38.74 cm (H) x 22.22 cm (W) x 27.94 cm (Ext)
18.75 in (H) x 8.75 in (W) x 11 in (Ext)
47.63 cm (H) x 22.22 cm (W) x 27.94 cm (Ext)
120 VAC 60HZ
Not for use with a dimmer or timer
13 W
. Customer service hours are Monday
#2 Phillips
Pliers
Screwdriver
Wire Wire
Cutters Strippers
5. Separe el CONECTOR DEL
CONTROLADOR LED del
CONECTOR DE LA PLACA (Fig.
15).
6. Retire los EMPALMES
PLÁSTICOS y separe los CABLES
DEL CONTROLADOR LED de los
CABLES DE LA LUMINARIA
(Fig.16).
7. Retire los TORNILLOS DEL
CONTROLADOR, saque el
CONTROLADOR LED
ANTIGUO de la CUBIERTA y
cámbielo por el
CONTROLADOR LED NUEVO,
asegurándolo con los
TORNILLOS DEL
CONTROLADOR (Fig. 17).
Retire aproximadamente 3/8" de aislante de los CABLES BLANCO y NEGRO del
8.
CONTROLADOR LED NUEVO. Realice las siguientes conexiones utilizando los
EMPALMES PLÁSTICOS:
DE LA LUMINARIA
CABLE ROJO
DOS CABLES BLANCO
9. Conecte el CONECTOR DEL CONTROLADOR LED al CONECTOR DE LA PLACA
(Fig. 15).
10. Coloque la PLACA DE LED sobre la CUBIERTA usando los TORNILLOS DE LA
PLACA (Fig. 13/14).
11. Asegure la CUBIERTA al ARMAZÓN usando los TORNILLOS DEL ARMAZÓN (Fig.
11/12).
12. Reconecte la luminaria a los cables de alimentación y vuelva a montarla en la pared
(Fig. 10).
Page 19
Fig. 15
Fig. 16
Fig. 17
DEL CONTROLADOR LED NUEVO
con CABLE NEGRO
con CABLE BLANCO