Tabla de contenido
EN
Connecting Machine to Power Source
Connect the machine to a power source as illustrated. (1)
This appliance is equipped with a polarized plug which must be
used with the appropriate polarized outlet. (2)
Attention:
Unplug power cord when machine is not in use.
Foot control
The foot control pedal regulates the sewing speed. (3)
Attention:
Consult a qualified electrician if in doubt of how to connect
machine to power source.
Unplug power cord when machine is not in use.
The foot control must be used with the appliance by
1902A
(110-120V area)/
manufactured by ZHEJIANG FOUNDER MOTOR
CORPORATION LTD. (China)
4C-316Q
(110-125V area) manufactured by Wakaho Electric
Ind. Co., Ltd. (Vietnam)
Sewing light
Press main switch (A) to " l " for power and light.
IMPORTANT NOTICE
For appliance with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it does not
fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do
not modify the plug in any way.
a. Polarized attachment plug
b. Conductor intended to be grounded
FC-2902A
(220-240V area)
FC-
1
a
b
2
6
A
3
Tabla de contenido
