Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
1
Connect the power plug to
a suitable power outlet.
TIP-OVER SHUT-OFF PIN (ON THE BOTTOM)
OVERHEATING PROTECTION
If the product overheats, the product switches off automatically. In this case,
disconnect the product from the power supply and let it cool down completely.
Remove any objects that block the product. If necessary, clean the product. Refer any
other servicing to qualified personnel.
CLEANING AND CARE
• Warning! Unplug the product and let it cool down completely before cleaning.
Never immerse electrical parts of the product in water during cleaning or operation.
Carefully remove dust from the protective guards with a vacuum cleaner.
• Clean the product's exterior surfaces with a slightly damp cloth and then dry
them thoroughly.
• Make sure that no water enters the product interior (for example, through the switch).
• Keep the product in a dry, cool location which is protected against moisture and
direct sunlight. Keep this product out of the reach of children.
IM_OFH303-S_140603_V02_HR.indb 17
17
2
Turn the OFF / fan control
switch on the desired
position.
If the product topples during operation, it will be
automatically turned off by the safety pin. When the
heater is placed upright again the product restarts
immediately.
3
Set temperature and adjust
at any time as desired.
3/6/14 2:09 PM
Tabla de contenido
